Phantom™ Filters

The Phantom Fan-powered Filter Unit (FFU) from Gordon has set the standard for the quietest operating noise, while maintaining high airflow output, with unsurpassed reliability.

Featuring an Electrically Commutated Motor, the ECM model Phantom adds the benefits of enhanced performance and extremely low operating costs to the industry best attributes of the Standard Phantom.

Gordon’s R2F model phantoms feature a roomside replaceable HEPA filter, for cleanroom applications – typically life-science cleanrooms – where periodic filter change is expected.

STANDARD PHANTOM FILTERS

The PHANTOM by Gordon is the quietest operating FFU on the market, and its unsurpassed performance and reliability offer the highest value for your fan-powered filter unit (FFU) investment.

Regardless of your cleanroom design, there is a PHANTOM model to fit your unique
requirements.

The Standard PHANTOM is equipped with all the features you need for most FFU applications.

PHANTOM
FOR TECHNOLOGY + LIFE SCIENCES CLEANROOM APPLICATIONS

LOW NOISE

Single units operate at an exceptionally quiet NC-40 noise rating, on high speed setting. No FFU operates at a quieter or more comfortable noise level than the PHANTOM.

 

SAFETY

The ECM PHANTOM is U.L. and C.U.L. listed and approved as an appliance, guaranteeing high quality and dependability.

 

RELIABILITY

Motors are rated at 100,000 hours, averaging a life expectancy of over 11 years.

 

REPLACEABLE PREFILTERS

MERV 4 prefilters protect and extend the life of the HEPA final filters.

 

ADJUSTABLE SPEED MOTORS

Blowers are powered by 1/4 H.P. permanent split capacitor (PSC) 115 or 277 Volt / 1-Phase / 60 Hertz, 3-speed motors, with High/Medium/Low speed adjustment switch

PERFORATED AIR DIFFUSER FACE SCREEN

Perforated aluminum face screens perform the dual functions of diffusing the air stream to help gain unidirectional airflow, while protecting the HEPA filter media from damage

 

OPTIONS

  • ULPA final filters: 99.9995% efficiency @ .12 microns
  • PTFE final filters: to 99.99999% efficiency
  • Knife edge final filters for use in gel-seal ceilings
  • 12-foot Power cord (ships separately for field attachment)
  • A/C duct collar for direct connection to HVAC ductwork
  • Low off-gassing sealed bearing motors

ECM PHANTOM FILTERS

The ECM PHANTOM by Gordon is your best choice for an energy efficient FFU. The ECM PHANTOM utilizes an Electronically Commutated Motor (ECM) that converts any AC input power to DC voltage, delivering high torque values with minimal energy consumption. The significantly lower operating cost of this leading-edge motor technology pays for its cost premium in less than 2 years.

So in addition to having the lowest operating cost, the ECM PHANTOM is the quietest operating FFU on the market, with unsurpassed performance and reliability offering the highest value for your fan-powered filter unit (FFU) investment.

The ECM PHANTOM is equipped with all the features you need for most FFU applications.

ECM PHANTOM
FOR TECHNOLOGY + LIFE SCIENCES CLEANROOM APPLICATIONS

LOW OPERATING COST

The highly efficient ECM technology delivers high performance along with extremely low energy consumption.

 

INPUT POWER ADAPTABILITY AND SPEED CONTROL

The ECM motor controller operates on any single-phase input line voltage, 120V to 240V, converting to DC power for motor speed control ranging from 1% to 100%.

 

RESERVE CAPACITY

Factory speed program settings leave over 40% reserve capacity on the fan curve, more than sufficient to compensate for typical external static loading.

 

CONTROL AND MONITORING OPTIONS

ECM PHANTOM ffu can be furnished with Visual Control Unit (VCU) for manual speed adjustment with digital display, or Modbus RTU interface to communicate with remote Building Management System (BMS) of Industrial Automation System (IAS) software architecture.

 

LOW NOISE

Single units operate at an exceptionally quiet NC-40 noise rating, on high speed setting. No FFU operates at a quieter or more comfortable noise level than the PHANTOM.

 

SAFETY

The ECM PHANTOM is U.L. and C.U.L. listed and approved as an appliance, guaranteeing high quality and dependability.

 

RELIABILITY

Motors are rated at 100,000 hours, averaging a life expectancy of over 11 years.

 

REPLACEABLE PREFILTERS

MERV 4 prefilters protect and extend the life of the HEPA final filters.

 

PERFORATED AIR DIFFUSER FACE SCREEN

Perforated aluminum face screens perform the dual functions of diffusing the air stream to help gain unidirectional airflow, while protecting the HEPA filter media from damage.

 

OPTIONS

  • ULPA final filters: 99.9995% efficiency @ .12 microns
  • PTFE final filters: to 99.99999% efficiency
  • Knife edge final filters for use in gel-seal ceilings
  • 12-foot Power cord (ships separately for field attachment)
  • A/C duct collar for direct connection to HVAC ductwork

R2F PHANTOM FILTERS

The R2F PHANTOM by Gordon provides an FFU with easy roomside replacement of the HEPA final filter, while still offering the quiet operation typical of the entire line of PHANTOM FFUs, along with unsurpassed performance and reliability offer the highest value for your fan-powered filter unit (FFU) investment, especially for Life Science applications where validation protocols are necessary.

The R2F PHANTOM is equipped with all the features you need for FFU applications requiring periodic HEPA filter replacement.

R2F PHANTOM
FOR TECHNOLOGY + LIFE SCIENCES CLEANROOM APPLICATIONS

GUARANTEED AIR TIGHTNESS

HEPA filter frames have a channel filled with urethane gel sealant to mate with a knife edge on the R2F PHANTOM housing to provide a guaranteed airtight seal.

 

LOW NOISE

Single units operate at an exceptionally quiet NC-40 noise rating, on high speed setting. No FFU operates at a quieter or more comfortable noise level than the PHANTOM.

 

SAFETY

The R2F PHANTOM is U.L. and C.U.L. listed and approved as an appliance, guaranteeing high quality and dependability.

 

RELIABILITY

Motors are rated at 100,000 hours, averaging a life expectancy of over 11 years.

 

REPLACEABLE PREFILTERS

MERV 4 prefilters protect and extend the life of the HEPA final filters.

 

ADJUSTABLE SPEED MOTORS

Blowers are powered by ¼ H.P. permanent split capacitor (PSC) 115 or 277 Volt / 1-Phase / 60 Hertz, 3-speed motors, with High/Medium/Low speed adjustment switch.

PERFORATED AIR DIFFUSER FACE SCREEN

Removable perforated aluminum face screen allows access to the HEPA filter during replacement or validation testing.

 

OPTIONS

  • ECM motor for low energy consumption and reserve capacity to compensate for higher pressure drops due to filter loading Test Ports (2) for aerosol injection and upstream concentration sampling probe to facilitate validation testing
  • Knife edge housing for use in gel-seal ceilings ULPA final filters: 99.9995% efficiency @ .12 microns
  • PTFE final filters: to 99.99999% efficiency 12-foot Power cord (ships separately for field attachment)
  • A/C duct collar for direct connection to HVAC ductwork

Product Data

STD-PHANTOM-2X4

ECM-PHANTOM-2X4

R2F-PHANTOM-2X4

R2F-ECM-PHANTOM-2X4

Cleaning & Maintenance

PRODUCTSCLEANROOM – CEILINGS & FILTERSPHANTOM FILTERS